BucketBrigadeDevice : Cross-fed bucket-brigade delay synthesis¶
Description¶
Based on pyo’s 08_bucket_brigade_device.py example, with the regular Cecilia
sampler replacing the input oscillator. Two delay lines feed themselves and each
other through ring modulators and lowpass filters. Feedback sets self-feedback;
Cross Feedback sets feedback from the opposite branch. Lowpass Frequency controls
both filters. The output is compressed with threshold -30 dB, ratio 4, and knee
0.5, matching the example.
Delay Time 1 and 2 set the center delay times. Slow sine modulation adds 0.05 and 0.08 seconds at 0.005 and 0.003 Hz respectively. Ring Frequency 1 and 2 set the center ring-modulator frequencies, with drift of 50 and 40 Hz at 0.007 and 0.008 Hz. Delay times are limited to one sample through 2 seconds; ring frequencies are limited to 1 through 5000 Hz after modulation.
The sampler input is scaled by 0.025 before entering the feedback network. The two filtered branches alternate across output channels; mono output averages both.
Input¶
The standard Cecilia sampler provides sound-file or live input, with its normal looping, pitch, and polyphony controls. In the routing view, this module can also process audio from upstream modules.
Sliders¶
Control |
Range |
Default |
Unit |
|---|---|---|---|
Delay Time 1 |
0.001 to 2 |
0.25 |
sec |
Delay Time 2 |
0.001 to 2 |
0.3 |
sec |
Ring Frequency 1 |
1 to 5000 |
250 |
Hz |
Ring Frequency 2 |
1 to 5000 |
200 |
Hz |
Feedback |
0 to 0.999 |
0.8 |
x |
Cross Feedback |
0 to 0.999 |
0.99 |
x |
Lowpass Freq 1 |
20 to 20000 |
3000 |
Hz |
Lowpass Freq 2 |
20 to 20000 |
3000 |
Hz |
Delay 1 Jitter Amp |
0.0001 to 1 |
0.0001 |
x |
Delay 1 Jitter Freq |
0.01 to 20 |
1 |
Hz |
Delay 2 Jitter Amp |
0.0001 to 1 |
0.0001 |
x |
Delay 2 Jitter Freq |
0.01 to 20 |
1 |
Hz |
Ring 1 Jitter Amp |
0.0001 to 1 |
0.0001 |
x |
Ring 1 Jitter Freq |
0.01 to 20 |
1 |
Hz |
Ring 2 Jitter Amp |
0.0001 to 1 |
0.0001 |
x |
Ring 2 Jitter Freq |
0.01 to 20 |
1 |
Hz |
Feedback Jit Amp |
0.0001 to 1 |
0.0001 |
x |
Feedback Jit Freq |
0.01 to 20 |
1 |
Hz |
Cross Feed Jit Amp |
0.0001 to 1 |
0.0001 |
x |
Cross Feed Jit Freq |
0.01 to 20 |
1 |
Hz |
Lowpass Jit Amp |
0.0001 to 1 |
0.0001 |
x |
Lowpass Jit Freq |
0.01 to 20 |
1 |
Hz |
Parameter jitter¶
Each parameter has independent smooth random jitter. Amplitudes are relative:
parameter * random(1 - amplitude, 1 + amplitude), clipped to the parameter
range.
Each jitter uses a pair of half-width amplitude and frequency sliders. Amplitude
sliders are logarithmic, start at 0.0001, and use gliss=0.0 so their values
apply immediately at initialization. Frequency sliders set the jitter rate in Hz.
Graph Only¶
Overall Amplitude controls the output amplitude over the performance duration.
Popups & Toggles¶
Polyphony Voices sets the number of simultaneous sampler voices.
Polyphony Spread sets the pitch relationship between voices. Both polyphony controls are set at initialization.